Designed, engineered and proudly made in Australia, the Emblaser 2 is the second generation desktop laser cutter and engraver that is a perfect combination of ease-of-use, size, power, and price. Designed to be user-friendly, easy to set up, safe and easy to use in any classroom
So many materials
The Emblaser 2 can cut, mark or engrave cloth, cardboard, paper, leather, wood, plastics and so much more.
Safety first
Traditionally laser cutters have only been available for specialised learning areas, but the Emblaser 2 is a Class 1 laser making is safe to use in any classroom when combined with its air filtration unit.
The AS/NZS IEC 60825 classification divides lasers into 6 classes, with 6 being the highest and most harmful. The Emblaser 2 is a Class 1 device considered the safest and does not permit human access to laser radiation during operation.
Give depth to your work
A true 3D cutting & engraving machine, the Emblaser 2 allows you to achieve different levels of depths and details.
It gives your piece that extra dimension by giving you the control to adjust the height of the laser while cutting. Cut through thicker materials by setting your laser to automatically lower with multiples passes.
Features
Air-Assist
The Emblaser 2 utilises what is traditionally available only on industrial machines to improve the output quality of the engraved or cut parts. The technique involves injecting a stream of high pressured air into the cutting region simultaneously as the laser works to cut or engrave the area.
As seen in the photos, the effect of Air-Assist on the different types of materials is noticeable; the circles on the left are without the air-assist. Burn marks are significantly reduced if not present when Air-Assist is utilised.
Fume Extraction/Filtration
Equipped with an in-built extractor, fumes produced during operation will be vented outdoors. For complete indoor use, simply add the Fume Filter System. Both systems will work to clean the out the fume, making it safe for the user and prolongs the life of the machine.
Material Ignition Alert
Or simply just known MIA, never miss in action with this smart monitoring and notification system. MIA constantly monitors for the potential ignition of a material and the Emblaser will be put into safety mode.
Larger Workspace
Expand your canvas with a larger work area of 500mm x 300 mm x 50mm
Wifi & USB Connectivity
Don’t want to be tethered to the Emblaser 2 and just walk away with your laptop? Or are you working from another room? Simply connect to the Emblaser 2 through Wifi and gain access to full control wirelessly. Of course, you still have the option to directly connect your computer to the laser cutter via USB connection.
Workspace Camera
Fine tune material alignment with ease through the use of the in-built camera.