Vendor: 3D Printing Systems
Type: Laser Cutter
Price: 4130.28

The next generation in safe classroom laser cutting & engraving

A new revolution in affordable and easy-to-use laser cutter/engravers.

• Safe to use in the classroom
• Auto cut off when lid is opened
• Fume extraction with optional filtration unit.
• Workspace camera assisted alignment
• 3D high-resolution engraving with variable Z height.

Vendor: Vertigo Technologies Ltd
Type: Bundles
Price: 3623.02

View Vertigo M1 CNC Router Here

View UP Mini 2 Here

Vendor: Vertigo Technologies Ltd
Type: Bundles
Price: 4553.02 - 4738.02 (2 variants)

View Vertigo M2 CNC Router Here

View UP Mini 2 Here

Vendor: Vertigo Technologies Ltd
Type: Vertigo CNC
Price: 2795.00 - 3045.00 (4 variants)

About

We have Designed the Vertigo CNC M series machines with simplicity and ease of use in mind, our CNC’s are shipped completely assembled and ready to be used right out of the box. The M series CNC’s are capable of machining materials such as wood, plastic, carbon fiber & aluminum. The M1 has a cutting area of 610mm wide x 610mm deep x 75mm high (YES you can use a 75mm tool and still have 75mm of clear Z axis travel!), meaning you’ll have a large working area for cutting and machining your designs. The overall size of the CNC is 750mm wide x 750mm deep.

Controller

At the heart of the M series is a Vertigo Technologies designed 32bit controller for a faster and more accurate cutting experience, with build in ethernet USB C and micro SD card reader. No longer do you need to spend hours trying to get software and drivers installed and working, with our re-developed CNC optimized version Smoothieware you have the ability to connect to and control your CNC right from your web browser. This means you can control the machine right from your PC, phone or tablet with very minimal prior set-up.

Waste Board

We have used a new type of wasteboard on our new M series machine. Uniboard is a recycled plastic wood substitute with a solid outer skin with a closed cell inner to prevent water absorption. Uniboard, unlike MDF or plywood, has the ability to withstand small amounts of coolants when milling materials such as hard plastics and aluminum. This will greatly extend the life for your cutting tool as well and giving you a much nicer finish. Uniboard also gives you the luxury of not being too conservative with depths unlike having an aluminum or steel base board.

Cutting

The M1 series has a cutting area of 610mm wide x 610mm deep x 75mm high. The M2 series has a cutting area of 1210mm wide x 610mm deep x 75mm high. You can use a 75mm tool and still have 75mm of clear Z axis travel, meaning you’ll have a large working area for cutting and machining your designs.

Work Holding

We have included industry standard size T-slot track mounted 1mm lower than the waste board to help with cutting clearance. This gives you the ability to use a wide range of work holding options including but not limited to toe clamps, cam clamps and of course rocker clamps. This will give you a truly solid and repeatable work holding solution.

Drive

We have chosen a unique way to drive our machine, using lead screw rather than belts that have been used in CNC machines of the same class. We have found that opting for the lead screw design gives us superior tolerance and accuracy over belt driven machine. The M series CNC’s utilize high quality 10×10 acme lead screws and custom designed anti-backlash nuts to help increase both precision and wear resistance over other similar CNC’s on the market. After rigorous testing with several types of stepper motors we have opted to use a 0.9-degree NEMA 23 stepper with 400 steps per revolution, high precision, high power and low current draw per phase which helps keep our DRV8825 drivers nice and cool.

What You’ll Get

• All hardware
• All electronics and motors
• Homing switches X & Y
• Control software
• 2 x 3 Carbide endmill’s
• Makita RT0700C
• 6 x T-Bolts and nuts (for work holding)
   

Specifications

• Colour: Blue / Black
• Overall size: M1: 750mm, 750mm, 405mm
• Cutting Area: M1: 610mm, 610mm, 75mm
• Weight: M1: 22kg ><2kg
• Firmware: Smoothieware
• OS: OS X 10.9 or higher, Windows 7, 8, 8.1, 10
• Stepper Motors: NEMA 23
• Clamps: T Slot rails
• Router Makita RT0700C (Variable speed)
• Connection: USB C, Ethernet
• Control software: CNCjs, Pronterface, Laserweb
• Network control: Embedded web server (This also works over Wi-Fi )
• Power: 220v AC 50Hz
   

Warranty

• 12 Month parts and components warranty

Vendor: Vertigo Technologies Ltd
Type: Vertigo CNC
Price: 3725.00 - 4035.00 (4 variants)

About

We have Designed the Vertigo CNC M series machines with simplicity and ease of use in mind, our CNC’s are shipped completely assembled and ready to be used right out of the box.

The M series CNC’s are capable of machining materials such as wood, plastic, carbon fiber & aluminum.

The M2 has a cutting area of 1210mm wide x 610mm deep x 75mm high (YES you can use a 75mm tool and still have 75mm of clear Z axis travel!), meaning you’ll have a large working area for cutting and machining your designs. The overall size of the CNC is 1350mm wide x 750mm deep.

Controller

At the heart of the M series is a Vertigo Technologies designed 32bit controller for a faster and more accurate cutting experience, with build in ethernet USB C and micro SD card reader. No longer do you need to spend hours trying to get software and drivers installed and working, with our re-developed CNC optimized version Smoothieware you have the ability to connect to and control your CNC right from your web browser. This means you can control the machine right from your PC, phone or tablet with very minimal prior set-up.

Waste Board

We have used a new type of wasteboard on our new M series machine. Uniboard is a recycled plastic wood substitute with a solid outer skin with a closed cell inner to prevent water absorption. Uniboard, unlike MDF or plywood, has the ability to withstand small amounts of coolants when milling materials such as hard plastics and aluminum. This will greatly extend the life for your cutting tool as well and giving you a much nicer finish. Uniboard also gives you the luxury of not being too conservative with depths unlike having an aluminum or steel base board.

Cutting 

The M1 series has a cutting area of 610mm wide x 610mm deep x 75mm high. The M2 series has a cutting area of 1210mm wide x 610mm deep x 75mm high. You can use a 75mm tool and still have 75mm of clear Z axis travel, meaning you’ll have a large working area for cutting and machining your designs.

Work Holding

We have included industry standard size T-slot track mounted 1mm lower than the waste board to help with cutting clearance. This gives you the ability to use a wide range of work holding options including but not limited to toe clamps, cam clamps and of course rocker clamps. This will give you a truly solid and repeatable work holding solution.

Drive

We have chosen an unique way to drive our machine, using lead screw rather than belts that have been used in CNC machines of the same class. We have found that opting for the lead screw design gives us superior tolerance and accuracy over belt driven machine. The M series CNC’s utilize high quality 10×10 acme lead screws and custom designed anti-backlash nuts to help increase both precision and wear resistance over other similar CNC’s on the market. After rigorous testing with several types of stepper motors we have opted to use a 0.9-degree NEMA 23 stepper with 400 steps per revolution, high precision, high power and low current draw per phase which helps keep our DRV8825 drivers nice and cool.

What You’ll Get

• All hardware
• All electronics and motors
• Homing switches X & Y
• Control software
• 2 x 3 Carbide endmill’s
• Makita RT0700C
• 6 x T-Bolts and nuts (for work holding)
   

Specifications

• Colour: Blue / Black
• Overall size: M2: 1350mm, 750mm, 405mm
• Cutting Area: M2: 1210mm, 610mm, 75mM
• Firmware: Smoothieware
• OS: OS X 10.9 or higher, Windows 7, 8, 8.1, 10
• Stepper Motors: NEMA 23
• Clamps: T Slot rails
• Router Makita RT0700C (Variable speed)
• Connection: USB C, Ethernet
• Control software: CNCjs, Pronterface, Laserweb
• Network control: Embedded web server (This also works over WI-FI)
• Power: 220v AC 50Hz
   

Warranty

• 12 Month parts and components warranty

Vendor: Vertigo Technologies Ltd
Type: Vertigo CNC
Price: 5460.00 - 6425.00 (4 variants)

Vacuum Bed

Our M3 with a Vacuum Bed, please contact us for more information at [email protected]

About

We have Designed the Vertigo CNC M series machines with simplicity and ease of use in mind, our CNC’s are shipped completely assembled and ready to be used right out of the box.

The M series CNC’s are capable of machining materials such as wood, plastic, carbon fiber & aluminum.

The Mx3 has a cutting area of 1210mm wide x 1210mm deep x 125mm high  meaning you’ll have a large working area for cutting and machining your designs.

Controller

At the heart of the M series is a Vertigo Technologies designed 32bit controller for a faster and more accurate cutting experience, with build in ethernet USB C and micro SD card reader.

No longer do you need to spend hours trying to get software and drivers installed and working, with our re-developed CNC optimized version Smoothieware you have the ability to connect to and control your CNC right from your web browser. This means you can control the machine right from your PC, phone or tablet with very minimal prior set-up.

Drive

We have chosen an unique way to drive our machine, using lead screw rather than belts that have been used in CNC machines of the same class. We have found that opting for the lead screw design gives us superior tolerance and accuracy over belt driven machine.

The M series CNC’s utilize high quality 10×10 acme lead screws and custom designed anti-backlash nuts to help increase both precision and wear resistance over other similar CNC’s on the market.

After rigorous testing with several types of stepper motors we have opted to use a 0.9-degree NEMA 23 stepper with 400 steps per revolution, high precision, high power and low current draw per phase which helps keep our DRV8825 drivers nice and cool.

What You’ll Get:

• All hardware
• All electronics and motors
• Homing switches X & Y
• Control software2 x 3
• Carbide endmill’s
• Makita RT0700C OR Mini Brushless Spindle (1500w)
• T-Bolts and nuts (For work holding) 
• Vacuum bed (Vacuum not included)
  
  

Specifications:

Warranty:

• 12 Month parts and components warranty

Vendor: Vertigo Technologies Ltd
Type: Vertigo CNC
Price: 4170.00 - 5135.00 (4 variants)

About

We have Designed the Vertigo CNC M series machines with simplicity and ease of use in mind, our CNC’s are shipped completely assembled and ready to be used right out of the box.

The M series CNC’s are capable of machining materials such as wood, plastic, carbon fiber & aluminum.

The MX2 has a cutting area of 1210mm wide x 610mm deep x 120mm high, meaning you’ll have a large working area for cutting and machining your designs. The overall size of the CNC is 1350mm wide x 750mm deep.

Controller

At the heart of the M series is a Vertigo Technologies designed 32bit controller for a faster and more accurate cutting experience, with build in ethernet USB C and micro SD card reader. No longer do you need to spend hours trying to get software and drivers installed and working, with our re-developed CNC optimized version Smoothieware you have the ability to connect to and control your CNC right from your web browser. This means you can control the machine right from your PC, phone or tablet with very minimal prior set-up.

Waste Board

We have used a new type of wasteboard on our new M series machine. Uniboard is a recycled plastic wood substitute with a solid outer skin with a closed cell inner to prevent water absorption. Uniboard, unlike MDF or plywood, has the ability to withstand small amounts of coolants when milling materials such as hard plastics and aluminum. This will greatly extend the life for your cutting tool as well and giving you a much nicer finish. Uniboard also gives you the luxury of not being too conservative with depths unlike having an aluminum or steel base board.

Cutting 

The M1 series has a cutting area of 610mm wide x 610mm deep x 75mm high. The M2 series has a cutting area of 1210mm wide x 610mm deep x 75mm high. You can use a 75mm tool and still have 75mm of clear Z axis travel, meaning you’ll have a large working area for cutting and machining your designs.

Work Holding

We have included industry standard size T-slot track mounted 1mm lower than the waste board to help with cutting clearance. This gives you the ability to use a wide range of work holding options including but not limited to toe clamps, cam clamps and of course rocker clamps. This will give you a truly solid and repeatable work holding solution.

Drive

We have chosen an unique way to drive our machine, using lead screw rather than belts that have been used in CNC machines of the same class. We have found that opting for the lead screw design gives us superior tolerance and accuracy over belt driven machine. The M series CNC’s utilize high quality 10×10 acme lead screws and custom designed anti-backlash nuts to help increase both precision and wear resistance over other similar CNC’s on the market. After rigorous testing with several types of stepper motors we have opted to use a 0.9-degree NEMA 23 stepper with 400 steps per revolution, high precision, high power and low current draw per phase which helps keep our DRV8825 drivers nice and cool.

What You’ll Get

• All hardware
• All electronics and motors
• Homing switches X & Y
• Control software
• Makita RT0700C OR Mini Brushless Spindle (1500w)
• 2 x 3 Carbide endmill’s
• 6 x T-Bolts and nuts (for work holding)
   

Specifications

• Colour: Blue / Black
• Overall size: MX2: 1350mm, 750mm, 405mm
• Cutting Area: MX2: 1210mm, 610mm, 125mm
• Firmware: Smoothieware
• OS: OS X 10.9 or higher, Windows 7, 8, 8.1, 10
• Stepper Motors: NEMA 23
• Clamps: T Slot rails
• Router Makita RT0700C (Variable speed) OR Mini Brushless Spindle (1500w)
• Connection: USB C, Ethernet
• Control software: CNCjs, Pronterface, Laserweb
• Network control: Embedded web server (This also works over WI-FI)
• Power: 220v AC 50Hz
   

Warranty

• 12 Month parts and components warranty

Vendor: 3D Printing Systems
Type: 3D Printing
Price: 3709.22 - 5332.50 (3 variants)

About UP BOX+

• HEPA filter to remove air-born contaminants
• Filament Sensor – Automatically pauses when out of filament
• Power Outage – Resume mid-print
• Industrial design with internal steel chassis
• Impressive HD 100 micron 3D print resolution
• Fully automatic platform levelling and height sense
• Improved 3D printing speed – 30% faster than a UP

 

Specifications

Build size	255 mm width, 205 mm depth, 205 mm height
Build platform	Heated print bed with easy to remove platform
Smart Support	Intelligent Smart Support material, printed in the same material, printed at a lower density and built automatically by the included 3D print software
Selectable layer resolution	0.1 mm (100 micron), 0.15 mm 0.2 mm, 0.25 mm, 0.3 mm, 0.4 mm - That's a ultra fine HD detail of 100 microns!
Filament Sensor	Automatically pauses when out of filament
Power Outage	Resume mid-print
Platform Levelling	Fully automatic levelling with integrated levelling probe  - no human interaction required
Platform Height	Fully automatic height sensor - no human interaction required
Average noise	51.7 dB - as quiet as your fridge
Air filtration	Inbuilt HEPA filter - removes micro fine particles
Lighting	Active heart beat mood lighting, provide visual feedback of the print status
Dimension	485 mm width, 520 mm depth, 495 mm height
Weight	20 kg
Shipping Weight	34kg volumetric
Power input	220VAC, 50-60Hz, 220W
Connectivity	WiFi or USB (Print job stored and spooled to Printer, ability to turn off computer during printing.)
Consumables	1.75mm ABS Plastic Filament and PLA which is ideal for lost wax or investment casting
Warranty	12 month return to base
Software	UP Studio 3D printing software included free: Windows (7,8 &10) 32/64 bit, MAC & iPad
Unboxing time to print	15 minutes

 

Vendor: 3D Printing Systems
Type: 3D Printing
Price: 1128.02

About UP Mini 2

Introducing the UP Mini 2, 3D Printer, the highly-anticipated sequel to the much-loved predecessor UP Mini 3D printer. The newest addition to the UP! printers is affordable without compromising quality and ease-of-use.

With a clean, sleek and glossy white body and semi-opaque glass door & internal LED lighting, it's not just the looks that has changed. The UP! Mini2 has been revamped and upgraded with new features. The first of the UP family to include WiFi capabilities, ease-of-access touchscreen and aluminium handle for easy relocation. Other new features, already seen in the UP Plus 2 and UP BOX, includes: HEPA filtration system, automatic levelling, automatic nozzle height detection.

There is no sacrifice on build quality with the UP! Mini2, print with precision with its enclosed steel construction and fully-heated platform bed. The fully-enclosed chamber maintains stable ambient temperature to reduce chances of warping.

“Since the global announcement in Jan. 2016, UP mini 2 has attracted attentions from customers worldwide. The new features and sleek design have become the major features that meet customers’ need. We will continue investing more resources on research and development to provide the best 3D printing experience for everybody in the world.” - Tiertime CEO, Mr. Allen Guo.

 

Specifications

• Build footprint of 120 x 120 x 120mm with heated build table.
• Heat retention chamber to reduce warping.
• Double linear bearings on each axis - ensures consistent build quality throughout the entire print process.
• Layer resolution of 150 microns.
• Chip free and open consumables – You can use any suppliers ABS roll of 1.75mm plastic with your UP! Mini2. The UP! Mini2 consumable is an open design so you are not locked into expensive consumables as opposed to expensive inkjet cartridges.
• USB interface for inkjet simplicity print spooling, you can unplug your computer once the UP! Mini starts printing.
• New: WiFi connectivity for hassle-free wireless printing.
• Includes the Smart UP! Studio, tools and a full roll of plastic to get you started.
• Build platform: 120mm width, 120mm depth, 120mm height. 
• Selectable Z resolution: 0.15mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm
• Raftless printing: Yes
• Support Material: Smart Supports. Intelligent snap off support material, printed in the same material, printed at a lower density and built automatically by the included 3D print software.
• Dimension: 255mm width,365mm depth, 385mm height
• Weight: 8kg
• Shipping Weight: 10kg
• Power input: 110-240VAC, 50-60 Hz, 90W
• Connectivity: USB (Print job stored and spooled to Printer, ability to turn off computer during printing.)
• Consumables: 1.75mm ABS Plastic Filament or PLA (corn starch)  Filament
• Warranty: 12 month return to base. 
• Software: STL 3D layout and printing software included free for Windows and MAC 10.7 Beta
• Operating System: Windows XP, Vista, Windows 7, Windows 8, Windows 10 & OSX 10.7 beta
• Unboxing time to print: 15 minutes

Consumables:

• 500g spool of 1.75mm tough ABS filament plastic formulated with a very low odour. (1 roll included) Third-party spools can also be used.

Includes:

• UP! Mini2 Desktop 3D Printer
• Heated build platform and perfboard. 
• 1 x roll of 500g white ABS.
• Heat resistant gloves
• Spool and Tool
• Selection of tools to maintain and self service the printer.
• Visual Click to Print 3D Printing Software and USB drivers.
• STL files for printing its own spare parts.

Included 3D Printing Software:

• Free layout and printing software (Scale, Rotate, Move & Print)
• Supported File Types: STL (Most leading 3D CAD packages support export to STL)
• Extrusion temperatures 260 and 200 degrees.
• Print Preview with material usage and time estimates, allows you to cost prototypes before manufacturing. 
• Automatic layout
• Repeat last print
• Rotate, Resize, Scale, Move 3D object
• Select layer thickness 0.15mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm
• Select print speed vs. quality
• Variable solid thickness of models with honeycomb fill.
• Smart Support - Automatic Support material angles, 10 to 80 degrees
• Operating System: Windows XP, Vista, Windows 7, Windows 8, MAC 

Vendor: 3D Printing Systems
Type: 3D Printing
Price: 1554.34 - 2242.51 (6 variants)

About UP Plus 2

• Redesigned model inside and out, engineered to provide continuous dimensionally accurate 3D printed parts
• Best-in-class desktop 3D Printer and easiest to use
• Innovative auto leveling platform calibration and automatic height sensor
• Improved 3D print spooling speed

More Info

Using a 3D Printer just got easier, the UP Plus 2 features automatic platform levelling along with automatic platform height detection. The all new UP Plus 2 is the latest version of the award-winning UP Plus 3D printer. It is closely based on its predecessor, but with a host of innovative new refinements. The newest way to print quality 3D models right from your desk for visualisation, collaboration, and functional prototyping testing.