MX3-Neptune LIGHT CNC Router
Bigger is Better!
Due to high demand, we have increased lead times, please call or email us to discuss your requirements before purchase
Designed and manufactured in New Zealand by Vertigo Technologies, the Vertigo CNC is perfect for the prosumer.
All Vertigo CNC machines come fully assembled, including the MX3-N. They are shipped in their own custom-built shipping crates to keep them safe during transit. Just make sure you have some help to unload your machine and take it out of the box.
Once your Vertigo MX3-N CNC machine arrives it is ready to use straight out of the box. Just make sure you have pre-installed all the necessary software - this can be done before your machine arrives.
The Vertigo MX3-N CNC is designed for versatility and can be used to cut a range of materials like Foam, Wood, Plastic, Carbon Fibre, Aluminium etc.
The Vertigo MX3-N is the largest CNC in the Neptune line: with a cutting envelope of 1200mm x 1200mm x 120mm it is perfect for those bigger projects. The Vertigo MX3-N is sized to fit half a sheet of plywood, Most hardware store will have timber suited for this size and will usually cut wood to size free of charge if needed.
The Z axis also has 140mm of travel which comes in handy when cutting thicker materials and using long cutting bits.
The Vertigo MX2 uses acme lead screws to drive each axis with power being provided by NEMA 23 stepper motors. This design provides the Vertigo CNC superior accuracy over similar belt driven machines.
The lead screws are held in place by a dual angular contact bearing to take load off the motor. The bearing is then held in place by a sleek bearing cap that is precision manufactured in-house.
The brains behind the Vertigo MX2 CNC is an LPC1769 microcontroller running an optimized version of Smoothieware.
The Vertigo CNC controller is a modular design, including the microcontroller board, four-driver boards running TMC262 driver chips and an ESP32 for Wi-Fi functionality (coming soon).
The control box boasts a number of useful features: an E-Stop can be found on top for easy reach. At the rear of the box is a number of connections: power in, Ethernet and touch probe connector. Also on the back of the controller is the cooling vent and power switch. There is also a USB cable for connecting the controller to your computer. The cable is attached directly to the controller to limit the risk of accidental disconnection.
The controller connects to the machine using an industrial “Epic” connector and is secured in place by two levers so there is no chance of accidental disconnection during operation.
Vertigo Technologies makes continuous improvements to their controller and software, and the Vertigo CNC controller is designed with easy upgradability in mind.
The Z-axes on all Vertigo CNC machines are made out of billet aluminum machined in-house. The Z-axis is driven by a single lead screw centered between 2 linear rails.
The design of the Z-axis has been 2 years in the making and Vertigo Technologies continues to improve it. The most recent upgrade has been adding in the extra linear rail, which has shown noticeable improvement to the quality and accuracy of cuts.
All Vertigo CNC wiring looms are made using Lapp cable with Molex crimps and connectors, to ensure that the wiring is easily upgradable and customisable. The Molex connectors are used on all wiring connections including the motors, giving you versatility and the option to upgrade in the future as Vertigo Technologies continues to innovate.